ECOSPIR TS EV

• Main control box with “touch screen” type operator panel with a very easy, simple and intuitive use (figures/pictograms), for a rapidsetting and regulationof the different parameters
• Pre-setting of 8 different working cycles, each of them with all the parameters customized by the operator
• Machine working controlled througha compact PLC
• Possibility to select an automatic or a manually controlled working procedure
• Possibility to set a number of wrapping cycles in a continuous sequence
• Possibility to select among 3 different methods of wrapping: standard with cross wrapping (during the film carriage ascent and descent); one way wrapping (during the film carriage ascent only); standard cross wrapping with film carriage stop at the top of the load to permit the manual application of a top cover (the film carriage re-start is activated by the operator pressing the related button on the control box)
• Basement with rear predisposal for being lifted and moved with a fork-lift
• Separate setting for the botton and top reinforcing wraps
• Hinge facility (column/basement) for an easy and fast assembling of the unit
• Film carriage driving motor integrated in the mast (column)
• Film carriage transmission by chain
• Regulation of the film carriage speed, controlled through inverter and with separate parameters for the ascent and descent
• Safety system on the bottom side of the film carriage frame to stop its descent in case of presence of any obstacle
• Automatic detection of the wrapping height through photocell
• Turntable motor protected with a carter
• Regulation of the turntable rotating speed controlled through inverter, with soft start and progressive arrival in the same starting position
• Safety system with photocell, mounted o the open side of the turntable to stop the rotation in presence of a fork-lift of any other obstacle
• Turntable rotation with hard rubber covered wheels powered with a chain transmission

Machine made according to CE rules.

ACCESSORIES AND OPTIONS AVAILABLE ON REQUEST

• Photocell for loads having a dark or a reflecting colour, or with any other special condition
• Film carriage with a 200% fixed ratio (1 mt = 3 mt) power prestretch with easy and safe loading of the film, with direct transmission through gears and separate regulation of the film tension from the control panel
• Extended mast for a wrapping height of 2700
• Increased loading capacity to 1500 kg maxim