The wrapping cycle starts and ends at the top of the pallet; this uniquely different approach to attaching and cutting the stretch-film provides the following advantages:
- Selectable top banding capability
- Stabilizes the load early in the wrap cycle
- Places the ending film tail at the top of the load instead of the bottom
- Eliminates the need of a film clamp power source on the turntable (therefore less maintenance; no need of compressed air with hook-ups or noisy compressors)
- Easier, faster and safer positioning of the load on the turntable (no clamp or other systems that can be damaged)MAIN FEATURES:
- Working functions and operations controlled by a PLC, with touch-screen Operator Interface
- Power Off / On – Reset switch and Power-On indicator light
- Single button Auto Wrap cycle Start/Pause
- Machinestatus visual indicator (run; clear or fault)
- Selection among three (3) different types of wrapping : automatic / semi-automatic / top banding
- Photo-eye for the automatic load height detection
- Separate setting of the top and bottom wraps, from 1 to 12 revolutions;
- Variable turntable speed control (adjustable from 3 to 15 rpm), with a soft start acceleration and a final revolution deceleration with positive stop alignment
- Film tension control
- Broken film/run-out of film detection with automatic machine reset
- Separate film carriage raise and lower speed controls
- Film carriage Lower/Raise buttons
- Film carriage with an adjustable speed motor and driving through a belt/pulley with Anti-Fall Device.
- Pre-stretch film carriage (max film width of 500 mm) with a 200% fixe ratio (1 mt = 3 mt), powered by a variable speed motor, with a fully electronic dynamic dancer corner compensation
- Carriage descent obstruction shut-off device for additional safety
- Side mounted film carriage for operator convenience and safety
- Turntable inserted in a square-shaped frame and supported by a 36 roller bearing system (direct chain driving system, with chain tensioner)
- Button for the manual control of the turntable rotation
- Predisposal for lifting the machine (with a fork lift) from the front and from the rear side (holes in the basement frame)
- Heavy duty frame with structural steel construction and Electro-static powder coated paint finish
- Emergency Stop Button
Machine manufactured according to CE rules.
